Compact Tripod - Foldable

This is a remix of: https://www.thingiverse.com/thing:1460181 Thanks to Kernel770 for the original upload! List of…
13
53
3
624
updated November 7, 2022

Description

PDF

This is a remix of: https://www.thingiverse.com/thing:1460181

Thanks to Kernel770 for the original upload!

List of changes:

  • I remade the mount with a smaller plate to allow me to access the battery compartment on my camera.
  • The original dimensions were slightly loose-fitting so I remade each part with a smaller clearance between each part.
  • The front legs weren't identical so I fixed that.
  • I made the holes recessed to fit flush with M5 hex bolts where necessary.

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Infill:

20%

Notes:

Identical parts - print the front leg twice.

Post-Printing

You will need:

  • 2x M5 self-locking nuts
  • 3x M5 washers
  • 1x M5 wingnut
  • 2x M5 hexagonal bolts - 16 mm long
  • 1x M5 hexagonal bolt - 60 mm long
  • 1x 1/4-20 UNC bolt for the camera (or a bolt off another tripod)

Category: Camera

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License


Highlighted models from creator

View more