Pixel Product Charging Station

A way to charge all the Pixel products, phone, watch, earbuds. You know since Google wont make one.
23
100
2
2829
updated November 5, 2022

Description

PDF

A way to charge all your Google devices in one space.  This needs a pair of Yootech wireless charging pads plus the pixel watch charger.  Prints in 3 pieces which have the wires run through them before sliding together with friction fit.  There is a 4th piece which is optional that can cover the cable channel in the bottom of the base if you want a cleaner look.

The tolerances on these parts need to be how they are for friction fit.  Please print with a 0.4mm nozzle at 0.2mm layer height.  If you print at different settings I can't promise they will fit together properly.

Assembly:

  1. Insert the watch charger into the smallest part and thread the cable down the channel.
  2. Insert Qi pad 1 into the next smallest part and route the cable
  3. slide the watch charger into the phone charger being careful of the cables
  4. thread the 2 cables through the hole in the base and out the cable channel
  5. press fit the assembled phone/watch unit into the base.
  6. press the 2nd Qi pad into the slot in the rear and plug the cable in.  Depending on your tolerances you might want to remove 1 or both of the rubber rings on this pad.
  7. bundle the cables together
  8. Optional Slide the cable channel cover over the slot on the bottom

Unfortunately since these are separate chargers you will still need to plug them in individually.  I use something like this one my nightstand.

Tags



Model origin

The author marked this model as their own original creation.

License