I made these for my wife to use when she is painting picture frames.. You could buy them but why not make them instead. I used these as a reference: https://www.amazon.com/Painters-Pyramid-Stands-Yellow-KM1257/dp/B003L2DDAI/ref=asc_df_B003L2DDAI/?tag=hyprod-20&linkCode=df0&hvadid=198100706044&hvpos=1o2&hvnetw=g&hvrand=7859907645042730086&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015247&hvtargid=pla-319559619989&psc=1
Enjoy
Rafts:
No
Supports:
No
Resolution:
Your choice
Infill:
100%
Filament:
Your choice Your choice
Notes:
You could use whatever filament you have laying around. Just be sure to use the correct material for the strength you need to hold up. Use a thicker layer to increase the strength as well. The ones I made are PLA printed with .3mm layer because they are used to hold up picture frames.
Category: HouseholdThe author marked this model as their own original creation. Imported from Thingiverse.