Fix filament Jam issue with E3D V6 by changing full metal 1.75 mm throat to 4.1 mm bore throat

Hello fiends,

In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which i purchased having 1.75mm full metal throat. While printing the filament jams and prints were wasted. I fed up with this problem and tuned retraction settings but problem remains same.

I thanks to Mr Andre_action Instagram profile who helped me to understand the issue.

Now i changed the throat with 4.1 mm bore the video how i changed the throat is uploaded to youtube check out below link.

Now the problem is completely solved and the printer is now printing like charm.