Your “man's best friend” will love getting treats from a drawer with this pull. This has a 3mm screw hole for easy mounting. The holes are a 100mm apart
I have provided the STEP files this model if you would like to modify it!
Printing
Print with mounting holes down
Filament - PLA is perfect
Infill - 20%
Layer Height - .20mm
Supports - Use supports along the bottom to ensure model comes out with best possible quality
Parimeters - 4-6 work well
Additional Parts - None
Bed Adhesion - None
Rafts - You may want to use rafts on this model
Scaling - Scale at your own discretion
Filament Change - None specified
Post Printing Notes: While the holes tapped are for 3mm, you may have to drill and tap your own for the screws you have. Also measure the hole distance carefully It should be 100mm but after printing it may be different
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here
Please leave a comment and let me know how you like this model.
Also, if you like this model, check out my other models over here:
https://www.printables.com/social/130916-hendersons-handcrafts/models
Award winning Model “Japanese Toolbox” for the "Box Contest: here:
https://www.printables.com/model/260100-japanese-toolbox-inspired-locking-lid-box
Below are just few of my other models |
![]() |
The author marked this model as their own original creation.