Works really good! I like it :)
Tho, just a small thing, had to sand the small round parts that makes the two parts clip together, but it wasn't that much of a hassle!
Thank you for this nice Design.
Sliding Cigarette Box
Cigarette box for kingsize cigarettes.
Glue required to attach the base to the bottom of the insert.
365
2440
14
10 k
updated October 31, 2022
Makes
Comments
The orange one I printed at the original size, but it was too huge. I scaled it to 75.61 percent so that it would be usable for my everyday use. (edited)
Used it alot on work. After a couple weeks it still looks good and closes very well.
works great, had to resize the inner part a bit and the box is about 5mm to long for standard cigartettes.
i added my print settins so others can use it: mk3s+, printed in Prusament PLA, 0.2 Layer height(Speed Profile) and adjusted the perimeters
I scaled the width and length and the bottom flap to 98.5%, left the height alone and it fits perfectly. With the adjustment, you can fit a pack of smokes in it with a little room to spare.
Came out pretty great!
I had to resize the center one a little bit as printing it exacly as it was, it wouldn't fit inside the other box and would get stuck.
Going to use it as a theater prop
Printed using 20% scrap wood filament that feels just like a cardboard box, 0.25mm
Very cool design, I like it a lot. As others pointed out the dimensions are not perfect for cigarettes.
