Fidget Spinner Knob: Print-In-Place

Print-In-Place Spinner Knob

• The perfect cabinet/drawer knob for those who love fidget gadgets!
• Fully print-in-place
• This model was designed to work with 4mm bolts, though you may need to tap yourself if the tolerance is too tight.
• The tolerance between the spinner and the shaft part is .31mm. This may be too much or not enough depending on your printer. Please let me know if you would like a tighter/looser tolerance!
• .2mm layer height with 20% gyroid infill. 
• It was printed with a brim, which may not be necessary.