The display will fit all Tarmac Works release of the same casting. It is not tested with the other Pagani Zonda R casting, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
2) Base back wall:
3) Front Tag
4) Kerbs
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "FlatWall":
1) Start (Overall background colour, mine is in black)
2) Layer 9 (Track map and "Pagani Zonda" lettering colours, mine is in white)
3) Layer 14 (Start line and "R" colour, mine is in red)
Filament change layer for colours on "FlatBase":
1) Start (Stripe colour, mine is in white)
2) Layer 4 (Overall base colour, mine is in black)
Filament change layer for colours on "FrontTag":
1) Start (Overall colour, mine is in red)
2) Layer 6 ("Nurburgring" logo colour, mine is in white)
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base, kerb will need to be printed and hand painted yourself then glue on the flat base.
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
The author marked this model as their own original creation.