Steve Name Tag from Stranger Things

Printed at 0.2 mm layer heights with a 0.4 mm nozzle in Overture orange, gray blue and easy black PLA (the blue should have been darker, but I went with what I had).

The color change was done in Cura using a post-processing script at the layers where the next section starts. For me, that was starting with orange, filament change at layer 6 to swap to blue, then another at layer 7 to swap to black.

I included the reference photo I used and of the print. After taking that photo, I ran a sharpie around the outside to black out the orange and blue layers on the sides.