6.5 Grendel 10 Round Ammo Box

10 round 6.5mm Grendel ammo box
9
38
0
255
updated February 11, 2023

Description

PDF

Remix of Vilcoyote77 7.62x39 50rds box, but it has been heavily modified.
https://www.thingiverse.com/thing:4104794

I have also uploaded a 20 round box. You can find it here - https://www.printables.com/model/304258-65mm-grendel-20-round-ammo-box

I had orgininally made these up for test batches, but they are a nice size for slipping into a pocket, so these might be great for hunting.

Designed to use as little material as possible, but still be sturdy enough that it shouldn't break, requiring a reprint.

I made it large enough so that you can load long. SAAMI spec or factory ammo will fit with a good amount of room to spare.

Fired shell casings will sit lower than live rounds, but internal supports will hold the case at the taper, so you will still be able to grab the rim to pull them out.

My Odysee page - https://odysee.com/$/invite/@Suburban:1

Print Settings

Printer brand:
Creality

Printer:
Ender 3

Supports:
Yes, box only

Resolution:
0.24-0.32mm

Infill:
60%

Filament brand:
Overture

Filament color:
Space Grey

Filament material:
PETG

 

Notes:
Light-colored PETG suggested, as PLA can warp in the sun.
Walls at 0.6mm or more, infill probably doesn't matter much.

Suggest support everywhere for the box. Print box bottom down on the build plate, with the holes up. If you are confident about your bridging though, do what you want.

If you print the lid with the closed end down, you don't need supports. See photos.

Tags



Model origin

The author marked this model as their own original creation.

License