DIN Rail Raspberry PI 3/4 Holder

Here is my Din-Rail Holder for a Raspberry Pi 3/4, this holder is equipped with a 5010 fan to cool the Pi.

The following is needed for assembly:

4 * M3 x 10 (for the clip attachment to the bottom part)
4* M3 x 16 mm (mounting bottom and top part)
4* M3 Hex Nuts ( mounting 5010 fan)

Remixes are welcome :-)

The Din-Rail are a Remix from the Voron 2.4 DIN-Rail ;-)

27.11.2022 Updated:

Top Part was fixed. because of the position of the Fan doesent fit.