This is an octopus shaped pumpkin bowl with a lid. Perfect for keeping some treats handy for the Halloween season. You can swap out the triangle eyes for any of the eyes found here. Demo video: https://youtu.be/67PSM1I6LIQ
You will need to print the bottom part and the lips part from the original #3DTakoTuesday octopus.
See here for more accessories and ways to customize #3DTakoTuesday: https://www.thingiverse.com/leonardlee/collections/3dtakotuesday
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15 mm layer height
Infill:
10%
Notes:
Support are optional on the top and body parts, but please ensure that your printer, slicer, and filament are capable of bridges. For the full scale, bridges of up to 75 mm are required if no supports are used. My personal preference is to take the minor imperfections of a bridging surface over the scarred surfaces and wasted material/time from using supports.
use some superglue to secure the pieces that you want permanently attached during assembly
Category: ContainersThe author marked this model as their own original creation. Imported from Thingiverse.