Door handles for the Bambu X1 printer. Use them as a replacement or to give a touch of color to your machine.
- For assembly you only need the screws and washers from the original handle.
Warning:
The door glass is delicate. When screwing carefully as it may damage or break the glass.
- Print the models at 0.16 and 25% fill. Make sure that the holes in the part are clean before inserting the screws. Print in two colors if desired.
- The attached .3mf files already include the ideal position to print the design. Only one of the designs needs supports, sample images are attached.
If you like my designs give me like and share. If you like them a lot invite me to a coffee.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
ESPAÑOL
Tiradores para la puerta de la impresora Bambu X1. Úselos como reemplazo o para darle un toque de color a tu maquina.
- Para su montaje solo necesita los tornillos y arandelas del tirador original.
Advertencia:
El cristal de la puerta es delicado. Al atornillar hágalo con cuidado ya que puede dañar o romper el cristal.
- Imprimir los modelos al 0,16 y 25% de relleno. Asegurase que los agujeros de la pieza están limpios antes de introducir los tornillos. Imprimir en dos colores si se quiere.
- Los archivos .3mf adjuntos ya incluye la posición ideal para imprimir el diseño. Solo uno de los diseños necesita soportes, se adjuntan imágenes de muestra.
Si te gusta mis diseños dale me gusta y comparte. Si te gustan mucho invítame a un café.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
The author marked this model as their own original creation.