Design to work with Pi Cam v1.2. Current design won't fit the NOIR Pi Cam. Print with orientation as shown in photo
7
38
1
570
updated January 15, 2023

Description

PDF

Designed to mount Pi Cam v1.2 on the gantry of the Fokoos Odin-5. This model is tested to work with Sovol SV01 Pro

Viewing angle is optimized so you will have a full view for time-lapse or monitoring your print

Bill of materials for screws

  • 4x M2 x 8mm Socket Cap screws
  • 4x M2 Nuts
  • 2x M3 x 8mm Socket Cap screws

Assembly Instruction

  • Remove existing cover for the X endstop on the Odin-5
  • Mount the Pi Cam bracket to the existing holes on the gantry
  • Run your FFC cable as needed

Revision:

  • R4: Increase the distance of the camera. So now when the extruder goes home, the camera is not blocked
  • R5: Add 2x mounting holes for FFC Clamp to secure the Pi cable

If you think the model is useful, please feel free to donate to support future development work

Model origin

The author marked this model as their own original creation.

License