Filament Spool Shelf | IKEA RÄCKA
Hi, this is a filament spool shelf. The rods are IKEA RÄCKA.
37
214
2
2992
updated May 19, 2019
Makes
Comments
What screws should be used tor the rings?
Gets the job done nicely! I printed four brackets so it should easily handle lots of heavy spools.
Good luck with just the 2. I had 3 and was all like, "this doesn't need 3". Removed the center one and it collapsed onto my laptop and DSLR sitting on my desk that night. :(
Take it from experience, put one in the middle.