Wall mounted filament shelf / Spool shelf

Filament spool shelf/rack to be used with any 16mm rods or tubes.
27
130
2
878
updated October 29, 2022

Description

PDF

For my workshop I designed a wall mounted filament shelf that can be extended as much as you like. For this there are three models: 

  • Filament shelf end piece left
  • Filament shelf end piece right
  • Filament shelf middle piece

You need at least the two end pieces and as much middle pieces as you like. For my 2m shelf I used one middle piece.

In addition to the 3D printed parts you need 2x16mm rods or tubes, I used four one meter aluminium rods.

If you like you can open up the holes in any 3D modeling software as I left enough material around the holes. If you have any specific request for sizes, just drop me a comment and I will upload them.

It is a very easy print as there are no fancy geometries if you print it laid down.

I printed it in ABS, but as it is a quite rigid model PLA should work fine as well. 

 

My print settings:

  • 0.2mm layer hight
  • 75% infill (maybe you can use less)

Tags



Model origin

The author hasn't provided the model origin yet.

License