Remixed from the already excellent design by vl4dt3p3s, https://www.thingiverse.com/thing:3995301
My alterations:
Things I want to add, but haven't yet:
You should be able to follow the instructions in vl4dt3p3s design. Although you can now use slightly longer M3 screws if you don't have the proper sized ones.
It does take a long time to print!
Printed mine with a .8mm nozzle with a layer height of .28mm and it still took about 24 hours to print.
Supports are required, unless you REALLY have large bridges dialled in.
Did reduce the amount of top and bottom layers to 3, you could probably go down to 2 if you wanted to save on plastic, with the risk of having issues when inserting the M3 brass inserts (they might melt right through!)
I have included the source Fusion360 file if anyone else wants to remix this further!
Printer:
Creality CR-6SE
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.28
Infill:
10%
Filament:
Generic PETGAny
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.