Anycubic Kobra Filament Guide Roll

You will need this parts:

2 Bearings: MR106-2RS for each roll

This is a bracket to guide the Filament over the top of the Anycubic Kobra (Not Max!)

I used a 0.1mm Tolerance to fit in the Bearings.

In TinkerCAD there is another Version of it. https://www.tinkercad.com/things/88lp8VYlQPl

Edit:

I updated the Design with a 3-arm design (preconfigured holes for the already provided screwholes) and a configured roll, that can be printed with no supports. The single roll holder can also hold the new rolls.

On the Picture i forgot to mirror one holder (the screwhole is not in middle position!) and i had to drill a pretty ugly hole. So dont forget to mirror the holder, or just use my All-in-One STL file.

Update 2:

Where 1 Arm and 3 Arms is, there should also be a 2-Arm-Version ;)

So i updated the design with a 2 Arm and Filament slipping protector.

Now the filament wont be torn off the rolls. You can still use the "Old" Rolls from the 3 Arm Design.

Print Settings

Printer:

Anycubic Kobra

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0,10mm

Infill:

30% Gyroid

Filament:

Black How I Designed This ===================

I remixed the Clip from the other project and added my own roll and the "circles" for the Bearings.

Alternative you dont have to use the Bearings and can widen the 3mm tall slots to fit in each other.

https://www.tinkercad.com/things/88lp8VYlQPl