Pendant Lamp

This is a modular pendant lamp that can easily be modified by adding, subtracting, and playing with different shapes and colors.

It uses a "common" 40mm socket, canopy, and cord set found on Amazon, Ikea, eBay, and others. Example Links Below.

The design uses four primary printed pieces:

Translucent Top, Center, Bottom.

Colored Halo (120mm, 140mm, 160mm, 180mm included)

The translucent sections are designed to friction fit together. A dab of adhesive could be used for a more permanent fit. Additionally an unfinished untested twist lock design is included to experiment with.

Parts Used.

Pendent Finish Kit: https://www.amazon.com/gp/product/B000WEMHF0/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

T10 8 watt LED bulb: https://www.amazon.com/gp/product/B07FQF1XBK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Other Sources (Untested)

Ikea Cordset: https://www.ikea.com/us/en/p/hemma-cord-set-white-10175810/

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Nothing Specific PLA / PLA+ Makers Choice Post-Printing =============

Do Not Use Incandescent Lamp!

It will get too hot, start a fire, and kill everyone!

No Joke!

If you use this design do so wisely at your own risk.

Enjoy!