QuinLED Dig-Quad V3 Case

This is a QuinLED Dig-Quad case / enclosure remixed from https://www.printables.com/model/223377-quinled-dig-quad-v3-case. with some changes:

• Much smaller footprint without extra room inside.
• External antenna mount hole on side and lid.
• Ears with #6 holes for mounting to wooden surface.
• Rounded many edges.
• Smaller walls so no infill with 3 line width on 0.4mm nozzle.

Best printed on a 0.4mm nozzle with 3 line width and 6 bottom layers to avoid any infill.

The non-vented lid and enclosures can be mixed together (ie. you can use a vented lid and non-vented enclosure together if you like).

Built with Onshape and CAD publicly available at https://cad.onshape.com/documents/6b332db414a2cafaa24c645e/v/cbb5aa0b48b9385bf61ca361/e/329efc048796baa588830a8b.

Minor Edit 12/11/2022:

I didn't add an opening for the ground terminal block on the edge of the board. That has been added now to both enclosure models. I also flipped the lid so it should lay flat by default now.

Edit 12/23/2023 (V8):

Updated the models to V8 which incorporates the updated builtin antenna space as well as removing the notch from the external antenna hole. It seems newer kits may have a different type of antenna that has no notch. Though, the simple hole should work for either.

• Much smaller footprint without extra room inside.
• External antenna mount hole on side and lid.
• Ears with #6 holes for mounting to wooden surface.
• Rounded many edges.
• Smaller walls so no infill with 3 line width on 0.4mm nozzle.