Vase 831

A twisted pencil vase for decorative purposes to hold pens and pencils, or anything else. 

It is 111mm tall and 79mm wide.

Print time approximately 2 hours and 20 minutes with a single wall at print speed of 50mm/s.

The photo shows the vase printed in vase mode. It can be printed in normal mode with 0 top layers and 0% infill .  The stl file is solid.  It prints great in either vase mode or normal. 

The photo shows the vase printed in midnight black by Overture.

Print instructions

Nozzle size: 0.4 mm 
0.2mm layer height
0.8mm wall line width recommended 
50mm/sec print speed
Spiral Vase Mode enabled (spiralize outer contours in Cura)