Pizza Cutter Replacement Parts

Our pizza cutter broke, so I made a new body for the blade.
In the contest Repairs
17
40
0
320
updated January 3, 2023

Description

PDF

This is a replacement body for our broken pizza cutter. 

 

The screw broke, but everything else was still perfectly fine. 

First I wanted to just replace the screw, unfortunately I wasn't able to get the broken bit out, so instead I remodeled the entire body. 

I wanted to keep as much as possible from the original, like the rubber sleeve and the blade guard. 

Also I made a body with a handle to use without the sleeve, just in case the sleeve would break as well. 

 

Fortunately everything fits like glove and works great.

You might want to sand the part on which the wheel sits to reduce friction ('cos layer lines) to make it spin smoother. But it works just fine even without sanding. 

 

I only printed the body for the sleeve and the screw in PETG, as all other parts from the broken pizza cutter could be re-used. 
Just in case you also need the spacer, I included these files as well.
(and even the blade wheel, but only for reference, so you know if you have the same one. I strongly suggest to stick with the real blade.)

 

Also I added my .step files, so you can easily remix it and make sure it will fit your own pizza slicer. 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more