Customizable Easy Gyro Remix

This is a remix of Customizable Easy Gyro (https://www.thingiverse.com/thing:802145) by atartanian (https://www.thingiverse.com/atartanian)

This model is great and everyone likes to play with them. Therefore, I made some more options. The original is here, as well as the original with the center filled in (you can easily cut out images in your favorite modeling software). 

I also wanted a mini version. I took the outer ring off and patched the holes. Then I shaved 0.5mm off the top and bottom before scaling it down just a bit. The mini version is available with an open or solid center. The mini I can print in about an hour by scaling it to a diameter of 45mm in Cura.

For certain images, I wanted a color change, but only on the inner circle. So, I separated the inner circle from the outer circle. I included my new logo so you can see. (check out my website at www.splashtech.solutions) 

NOTE! Make sure your z-seam isn't in the connecters. I like to just rotate it in Cura until the seam is where I want it. 

Enjoy!