Nespresso Capsule Box Holder

A set of holders for Nespreesso capsule boxes (Original, not Vertuo), fitting one to five boxes.

Can be mounted with a 12 mm round magnet, or used as a standing dispenser.

I used 12x3 mm magnets, in my case four magnets were able to hold five boxes of capsules, but your results may vary.

Magnet holes are sized at 12.1 mm resulting in a snug fit in most cases, but they may be too loose depending on the dimensional accuracy of the magnets and print itself.
Use a bit of tape around magnet's edge if the fit is too loose.

Step files included.

Source files in Onshape: https://cad.onshape.com/documents/0484a2ccdf40eed387990c00/w/a9fb065573e9bd221b3741b9/e/34c2b52ca3178884d2061735