Cord Clamp (Cord Stay) for 6mm power cord (v1)

While installing a power cord in a 4-bulb fluorescent light tray, I needed to make sure the cord would not be loose (v1)
4
9
0
153
updated October 14, 2022

Description

PDF

So, I retrofitted a 4-bulb fluorescent light tray with LED bulbs, and also turned it into a “shop light” with a plug. While installing the new power cord I needed to make sure it would not be loose (not permitted to slide in or out of the fixture). 

If you should ever happen to need to same thing, just print up two of this part, one for above (outside the tray) and one for below (inside the tray), and then use two M3 x 20mm screws and two M3 nuts to clamp them on tight, as shown in the pics.

These are the ballasts I used for the retrofit: Robertson 3P20116 eBallast, Instant Start, NPF, 1 or 2 Lamp F32T8, 120Vac, 60 Hz, Model ISU232T8120 BA (Replaces Robertson 3P20003, Model ISU232T8120 /B)

File versions: I'm including both .stl, .3mf, and .step.

PS: this is another great use of the end of a roll when you only have a tiny bit of filament left.

 

My PayPal tip jar: https://paypal.me/design8studio  

 

Various LowRider 3 CNC remixes:

 

View all my models and remixes on Printables:

 

*Amazon product links are affiliate links.   

Tags



Model origin

The author marked this model as their own original creation.

License