A set of 30mm tall fences for use in my mother's Christmas village. The fences are made with individual fence posts…
248
1081
5
3182
updated October 13, 2022

Description

PDF

A set of 30mm tall fences for use in my mother's Christmas village. The fences are made with individual fence posts and fence segments that connect them. Everything connects together with a press-fit mortise and tenon. Small bases can also plug into the bottom of the posts for added stability.

There are three types of posts: end posts that only accept a fence segment on one side, middle posts that accept them on both sides, and corners that accept them at right angles.

There are three types of fence segment: a simple picket fence, a picket that alternates front/back, and a wrought iron fence.

The removable bases also allow for the base to printed in a different color than the fence. All mine are printed in white so they match the snowy Christmas village backdrop.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

20%

Filament: Esun PLA+ White, Black, Brown


Notes:

The fence segments are designed to be printed flat. The posts are laid down on one side. I print the middle segments with the holes parallel to the build surface, but you may need to experiment with your printer.

There is a 0.1MM clearance between the 2mm mortise and 1.9mm tenon. This makes for a nice press fit on my Ender, but I don't know how well it will work for your printer if it holds to different tolerances.

Category: Buildings & Structures

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License


Highlighted models from creator

View more