Tealight holder for lithophane circle

I suggest you to use https://3dp.rocks/lithophane/ for the lithophane. The picture you use should have a resolution of about 3000x1000 for the best results. I also suggest you to use the settings i have in the pictures. You have to select "Outer Curve" for the Lithophane! If you print the Lithophane you have to print it with 100% infill and you should print slower than normal. You'll probably need a brim. If your PC cant handle the lithophane, lower the vectors per pixel.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.1mm-0.16mm

Infill:

100%

Filament: Procatec PLA White