My 06 F-150 Lariat dust cover around my gear shifter broke and the only replacement options are to buy a grimy old used gear shifter assembly for $150-$200 or a new one for $300. This wasn't an option for me as it shifts fine, it just didn't have the dust cover to keep out dust, crumbs, etc. I cut off my old one and put this one on. I used a little bit of orange electrical tape to keep the indicator orange as opposed to whatever color filament it's printed in.
Printed in PETG and TPU. Highly prefer the TPU for the durability of the little feet to keep it in the track over PETG, but PETG did indeed work for me just as well.
Updated Model has a hole on the shift indicator. I wrapped mine in orange electrical tape so it looks original and the light shines through the tape. Also moved the indicator slightly lower so it doesn't bleed out anywhere.
2024-11-06 : updated with a new STL, removed the cut in the side as it would catch on the shifter and get “stuck:”. Also reduced the shift hole size for a more snug fit. Should be able to just cut with scissors and slide it around the shifter.
I also converted it to OpenScad so you can play with the indicator size/hole etc. Just by playing with the values.
The author marked this model as their own original creation.