Modular Storage - Customizable Bigger Mini Drawers Ultimate

Customizable Mini Drawers

This is a redesign of Karkovski's bigger mini drawers, which were based on zeropage's mini drawers. I liked the size of the bigger drawers, but wished I could make some larger units that fit with them.

So I made a customizable version in OpenSCAD. Mostly this was an excuse for me to practice designing customizable things in OpenSCAD. These slide on to Karkovski's mini drawers perfectly.

Besides being able to create boxes of any size, and with any combination of drawer dividers, I added optional air holes at the back to let the drawers move in and out easier, and controllable wall thickness. For single unit boxes, use 0.9mm wall thickness. Larger boxes use 1.4 or even higher if needed.

I highly recommend downloading the .scad file and using OpenSCAD instead of the thingiverse customizer - it's a lot faster!

Printing tips

I find 1x1 units print fine with a single perimeter and zero infill.

For larger units you may need to use 5-10% infill to make them a little more sturdy, and help with the large bridging that would happen on the back wall.