Volvo P1 Generic Gas Cap Lanyard / Tether

I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a tether (and didn't want to hold it or place on the roof), so I made a tether to hold it in a similar fashion to the OEM one. I think it came out pretty well.

I designed it with this particular cap that was with the car when I got it. I think it'll fit other caps that are around 70mm in diameter as I designed it with that in mind. I stays in place due to a slight lip on the cap.

I used TPU so it'll flex. I used 50% infill, but higher infill percentage will probably last longer.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.32

Infill:

50

Filament: Generic TPU Black