Exposure Lights Mount Adapter

Fit the mounts in opposite plane, i.e. front light to vertical post. In my case for Recumbent Tricycle.
1h 25m
1× print file
0.20 mm
0.40 mm
15.00 g
0
13
0
248
updated October 11, 2022

Description

PDF

I have a great set of lights, however I have a HP Velotechnik Recumbent Tricyle, which means I don't have the traditional handlebars, or seat post on which to mount my lights. I needed to be able to mount the front on the main boom, and the rear (see other model) to a horizontal stay.

There is a threaded boss on the from boom, so the mount is attached by a single cap-headed Allen (hex) bolt.

Printing on it's side keeps the supports from interfering with the bolt-hole, and improves strength.

I hope this helps. Please leave a like if it does, and post any makes or remixes.

All designs (however rubbish) are my own, and are made available for non-commercial use. Sale of design or prints is prohibited.

Tags



Model origin

The author hasn't provided the model origin yet.

License