Printed in black matte pla on textured sheet. Great print.
Sól: OpenDTU (ESP32 / NRF24L01+) case
Case for ESP32 / NRF24L01+ setup running OpenDTU to monitor Hoymiles inverters.
37
1096
7
16 k
updated November 8, 2022
Makes
Comments
Thank you very much for the hint with pins 15/16, that was the missing link to get the NRF24L01+ working! :) Also: Very nice case!
A perfect case for my RTL433 OpenMQTTGateway. Fits the ESP32 and the CC1101 perfectly.
Printed it in PETG and fitting very well. Know i just have to connect it next week. Many thanks for sharing the model and have a nice day!
Nice housing. Printed very well. The case can be assembled press-fit so no glue is needed. I had no ESP32 Node-MCU but only a ESP8266 Node-MCU. This was a bit longer than the ESP32 one, so I needed to overlap a bit over the NRF24L01+, but this worked pretty well, as there is enough space in the case.
