This is a M.O.D.O.K. helmet design based on a foam make by SKS Props.
64
115
0
1589
updated October 15, 2022

Description

PDF

I saw a video from SKS Props making this helmet using his HD Foam. I didn't have foam and wanted to test my 3D modeling ability, and thus came this helmet from his design.

Here is a link to his video showing how he built, assembled, and painted his helmet: https://www.youtube.com/watch?v=kgzt4ZKFOTk

I modeled and built the entire helmet in Tinkercad, then split it into 8 pieces because my bed was too small. I then split it into 2 pieces because by shrinking it to fit my head, I was able to print it in 2 pieces.

I didn't want to look for ball joints for the legs/arms so I modeled those myself as well. The joints are quite loose so if you want more posable legs/arms, you may have to use alternate attachment methods.

I made a separate piece for the bit below the head jewel because mine broke off after printing and I REALLY didn't want to spend another 2 days printing the front again just for that.

Print Settings

Printer:

Voxelab Aquila

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.16

Infill:

20%

Filament:

Kingroon PLA

White


Notes:

Print 2 M.O.D.O.K._Upper_Leg.stl, M.O.D.O.K._Lower_Leg.stl, M.O.D.O.K._Foot.stl, M.O.D.O.K._Upper_Arm.stl, and M.O.D.O.K._Lower_Arm.stl.

Print 2 M.O.D.O.K.\_Fist with 1 of them mirrored so you don't have 2 left hands (like I did originally).

Print 4 M.O.D.O.K._Ball_Joint.stl

Category: Costume

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License


Highlighted models from creator

View more