ULTRA LITE FACE SHIELD 1.0 NOZZLE PRINT 83 shields per spool

ULTRA LITE. DESIGNED FOR PETG 1.0 NOZZLE, 1.1 LINE WITH, .4 LAYER HEIGHT, AND NO PRINT COOLING. PRINTS 2 IN 37 MINS. THIS CREATES A DUAL WALL EXTRA STRONG PRINT WITH OVER LAPPING WALLS. I'VE NOTICED THAT PETG WILL CRACK IF YOU DON'T LET IT COOL DOWN A BIT BEFORE POPPING IT OFF THE BED SO BE CAREFUL. https://youtu.be/pgLlj8a95oo

I added second shield to the upper half if you cut it twice in 1/3 down to center of the shield then fold outsides over to the middle and staple it. I makes shield rounded and protects better. this also works on bottom half but do not cut half way through.

should make 83 shields per 1kg spool of PETG