Vase - M81 second try

Vase -M81 second try
If you like it --> press like it :-)

At vase mode prints i recommend to print with a wider line width. It is without problems possible to print with a 0.4mm nozzle a line width of 0.6 to 0.8mm. Slightly increase the temperature.

If you like vase mode prints especially which are no vases, you can join our group https://www.printables.com/de/group/vase-mode-explorations-everything-but-vases-15zYdDQ/comments

Would be happy to see your makes!