Vase designed for vase mode or spiralized outer contour. Scale to your need; however, keep an eye on the inside during your slicer preview to make sure it's clean.
I have used 0.4mm and 0.6mm line width (even with a 0.4 nozzle). May be even possible to do a 0.8mm line width.
0.3 layer height is what is in the picture. Should work with lower layer height as well
Used a marker to color the hearts :)
Hope you enjoy!
-----------------
☕If you would like to support this kind of work, you can do so at the following link:
--------------------
The author marked this model as their own original creation.