Duct Tape Keychain

Duct tape has a myriad of uses and is usually the easy go-to solution for when things break. Sadly, there is almost never a roll of duct tape within reach when things break. This small keychain can hold about three feet (1m) of duct tape so that whenever something happens, you can be ready. Did the cheap plastic grocery bag start to rip on the way to the car, seconds away from destruction? No worries! You will be surprised how often you will use this once you have it. It was designed with parameters in Fusion 360 so if you want it to hold more tape or be wider, you can do that easily. It is designed for standard 2" (51mm) duct tape.

Print instructions

Print with 100% fan speed, supports (preferably tree supports to save the surface of the base), 0.15 mm layer height, and everything else you normally print with. make sure to block supports in the keyring hole because supports in there are unneeded and are a pain to remove.

Do NOT print with my uploaded code, or any code found online. It could hurt or even destroy your printer. Slice your own file.