Sage/Breville precision tamper (IMS base)

Even if I didn't like the stubby design from the start on, over month of use I came to like the neat storage solution of the Sage/Breville stock tamper. Once I'd upgraded to a precision tamper base I had to model a handle to go with the original mounting location.

Compatibility

I've only tested the Dual Boiler, but as far as I know the stock tamper is the same for all Save/Breville portafilter devices. So this model is most probably compatible with all machines listed below. Please comment if you can verify.

• Dual Boiler
• Barista Touch
• Barista Pro
• Barista Express
• Duo-Temp Pro

Bill Of Materials

Remarks

Even the IMS base alone is heavier than the original tamper. The magnet in my machine is strong enough to hold it securely, but be careful.

I did not design to spec for the DIN 603 but the one I got from my local hardware store. Update the dimensions in the attached Fusion 360 file and re-export if necessary.