Ender 3 Pro/v2/Max Electronics Tray

Test fits grade been highly successful and as it is currently working as designed.

Will be producing a bottom cover that will be attachable for future designs to help hide cable's and object's from entering the compartment 

Designed to slide under the Y rail and onto the side 4040's and secured with 2 Low profile T nuts.

Has a channel on top to help avoid ay Linear Rails so you'll have a minor amount of bridging to do for this process.

will use standard Voron Electronic Bay Board setups and will require M2,5x5 screws and M3x5's for securements

• I have left the bottom open for better airflow and to give stock machines more airflow if needed and not limit the space. I can add bottom plate if needed/required
• Uses a variety of Manets and slide in T-slot adapters to add strength to the build

Files associated to the file:

Voron Parts:

https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/Electronics_Bay/Controller_Mounts

Leg Extensions:

https://www.thingiverse.com/thing:4721832

Linear Rail System plus all the Extrusion Systems (Patreon Service):

https://www.patreon.com/squirrelf3d/posts

Y Belt Tensioner:

https://cults3d.com/en/3d-model/tool/leandropuy-2 

Materials:

PETG or ABS suggested for print materials

x4 - M2.5x10mm Nuts + Bolts (Motherboard Adapter)

x4 - M3x6 Nuts (Motherboard)

x4 - M3 T-nuts

x6 - M3 8mm Bolts

x8 - 6x3mm Neodymium Magnets

Change LOG:

October 8: uploaded the Beta pieces and should be good to use, the right side compartment has no attachments added to the lid yet but feel free to add your own!

October 9: Added cable channels to front fan sections and minor adjustments to fit and design of the top sections to where they meet the frame.

October 12: Added a mocked up base for the enclosure you shouldn't need to reprint anything other then the Y-Front, and possibly the Front Covers for added magnet holes to the design to attach the bottom pieces with 6x3mm magnets

October 14: Added a slot cover just size the length accordingly it'll just snap into the slots for easy install/removal

Nov 24: Added Y stop pieces for left side attachment's, and the Dual Z belt bottom adaptor