Perfect! Thanks!!
PC4-M10 Cap
Drybox cap for PC4-M10 pass through.
74
364
5
3034
updated February 1, 2024
Makes
Comments
This came out great using Fillamentum 98a. It looks store bought. Thank you for the model.
Mordiev,
I have implemented your system and love it. I have purchased enough boxes for all my filament and now want to make caps for those not in use.
Do you run the TPU through the system? In other words from the box to the buffer to the MMU2S or do you bypass the buffer? (edited)
Mordiev, You still out there?
Literally moving my entire family about 1,300 miles this last week. It’s crazy stressful. But yes. I have used TPU through the system. The MMU doesn’t load TPU well. But when it gets loaded to the nozzle it works well. I don’t need to bypass the buffer. The most trouble I have had with any filament is PLA ironically. Some brands are so rough like sandpaper that they tend to jam in the PTFE tubes. But I use mostly PETG. Sigh. Still not a perfect system. (edited)
Nice, work perfectly.
Mine printed too tight. Cap wouldn't fit over the hex side and the holder wouldn't fit over the threads. When you print, you may need to adjust the size a little bit.
Interesting. How many perimeter layers did you use on the print? I could post a larger file. It was intentionally tight with the advice to use thin walls on the print.
I might not have gone thin enough