ITX open frame compatible with ATX PSU (Modified)

I modified the original file to be printed with an Ender 3 or the same small-sized printer. Connected the two halves with epoxy. You can use whatever you like, jbweld or something similar. I wouldn't advise superglue or liquid glue. Also, some parts are made to fit with one another because I hate the thought of it being connected plainly with epoxy or glue.

-GPU mount was rotated so that the GPU fan will face outward unlike the original one. I also added a bracket for SSD or 2.5 HDD since the original one did not have space to put storage unless you put M.2 on your motherboard (only applicable for 2 fan GPU style, longer ones will not fit). 

Info from the original creator:
This is an ITX pc case that fits an ATX PSU and standard ITX parts.

)The PSU is mounted with three standard pc case screws.
)The mainboard needs standoffs first. These need to be melted into the plastic with a soldering iron for maximum strength. Then just use four standard mainboard screws to mount it.
)The graphicscard mount is far from thought out and needs a remake to allow faster swapping of the card. The current version works as intended. Although assembling is a bit tricky. You need two pc case screws (the same as used with the PSU) and a couple of M330, M320 and M3*16 screws with washers for the mount.
)a riser cable is needed to connect the GPU to the mainboard. 20cm is a great length in my opinion.

I designed the case to be printed on a Longer LK5 pro. Thats why the main body is only one big part with the GPU mount seperated for faster printing. That way the case is more sturdy but also incompatible with most smaller printers. You need at least 183x184x348.5mm clearence or redesign it so it will fit.

Printing settings:
Printer: Longer LK5 pro
Layer hight: 0.3mm
Print speed: 100mm/s
Support: yes (only for the PSU screw slots)
Infill: 20% (more is better but it even works great with 10%)
Print time: about 20 hours

At the moment there are two Versions available. Version 1 (V1) and Version 2 (V2).
Both work but still have their flaws with the GPU mount. I´d recommend going with V2 till i release V3.

Currently working on a third & better version. Hope to release it soon(TM)

Hope you enjoy
--------------

Originally created by https://www.thingiverse.com/maxwell57301/designs :)