BSE_01 Cyberdeck

Hackaday.io Project Page

The future is here, it's just not evenly distributed" - William Gibson

This is a custom built cyberdeck designed around a raspberry pi 4, waveshare 12.3" screen, 12v Battery, and a mechanical keyboard.

Print:

• 4 x Bottom Edge Fill
• 4 x Top Edge Fill
• 4 x Hex Foot
• 2 x Corner Piece Top
• 2 x Corner Piece Bottom
• 1 x Hinge Base left
• 1 x Hinge Top Left
• 1 x Hinge Base Right
• 1 x Hinge Top Right

Cut:

Ponoko

• 1 x Faceplate [3mm Thick Acrylic]
• 1 x Bottom Plate [3mm Thick Acrylic]
• 1 x Battery Plate [3mm Thick Acrylic]
• 1 x Computer Cover [3mm Thick Acrylic] Translucent Recommended

Sendcutsend

• 1 x Case Bottom [2.5mm Aluminum]
• 1 x Case Top [2.5mm Aluminum]

Purchase:

• Amazon Parts List
• 2 x 10mm x 30mm Shoulder Bolts 
• 2 x 6900-2RS Bearings
• 1 x 10mm x 0.1mm Ring Shims
• 1 x M4 FHS x 12mm
• 5 x M4 x 16 Standoffs
• 5 x M4 x 22 Standoffs
• 90deg Countersink Bit