SANWA OBSF-30 ARCADE BUTTON

This is a conversion kit for Sanwa 24 sized button to 30 sized buttons. The 30 sized triggers will fit right into these. Just make sure the extrusion multiplier for your filament is on point! (0.45 mm wall thickness on test prints).

Use PETG or make sure you don't have very brittle PLA as the tabs can break when you insert the buttons, be very gentle when you insert the printed button into the housing. 

A pre-supported set is included, you can use your slicers split to objects/parts function to print individual parts.

Print settings:

PLA or PETG (I use PETG)

Layer height: 0.15 - 0.2

100% Infill

Support: Already built into the design