Anet A8 Replacement rear frame

Anet A8 Replacement rear frame

Description:

I broke my frame and need a replacement. The part is designed as a one to one replacement, not as an upgrade for the frame. 

There are two versions. One whole rear frame for larger printers and one split into two smaller pieces and a joining piece.

Print settings:

100% infill recommended for strength

Print laying down
No support needed

Materials needed:

Only for the three part version.

M3 x 20mm 8pcs
M3 nuts        8pcs
M3 washers 16pcs

Longer bolts could be used.