AUER insertion boxes - Parametric

[DESCRIPTION]

This model is a replica of AUER stackable organizing box (see link).
It is fully parametric (Fusion360 file), that means that you can edit box height and base dimensions by multiples.

Default dimensions are 50*50*30, then you can multiply to obtain different sizes.
You basically need to edit 3 parameters : 

1. heightFactor : base height integer
2. widthFactor : base width integer
3. boxHeightFactor : height of the box → !! Begin @30mm (factor = 1) which is half than those sold by AUER !!

Boxes are stackable.

See use cases here :

• Toolbox
• Euro standard box slots

[PRINT]

You need 4 “buttons” for each box if you want to put in organizer tool box or Euro box described below.

Those buttons can be simply glued in place and this to avoid supports and bridges.

• Print from bottom, any default setting should fit. 
• Bed temp could be increased to better sticking on large models (60 → 65° ?)

[EXTRA LINK]

• Grid from @JustTry is here 
  • To print a grid that fit this model instead of buying it… 
• AUER
  • German company, they are making excellent products to keep your work organized, see : link

[EXTRA LOVE]

If you don't have Fusion 360 installed, I can generate a box with good size and add in DL files. 
Simply send factors in comments : 

Example with : 

• Base Width 3
• Base Height : 2 
• Box Height : 2

You will have a box of 150*100*60mm 
Naming convention will be : BOX_322

;)

[EXTRA SHARE]

Feel free to improve, share, remix and post any suggestions.
If you remix, please point out this page in your description.

[CHANGE LOGS]

• 2025-01-21 : Adding 4 sizes
• 2022-09-29 : Increase outside fillet to 3.5mm
• 2022-11-02 : V2, Simplify Model, avoid square base : use BOX_V2 component in F3D file