{"data":{"model":{"id":"28409","slug":"prusa-i3-mk3s-optimized-airflow-and-pinda-securing","name":"Prusa i3 MK3s optimized airflow and Pinda securing","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":1,"description":"

This is partly a remix of the original Prusa parts, and a new part.

Since I occasionally had warping with large area prints, I optimized the printer so that the air did not blow onto the print bed through the hotend.
\nSince I am operating the printer in a housing, I was able to exclude air ventilation from another direction.
\nI constructed a new part, which comes to the left of the hot end fan. There is therefore no return air on the print bed.
\nFurthermore, I added a guide for the outgoing air on the exiting side. This encloses the PINDA probe a little.
\nBecause I was there and it happened that the screw of the PINDA probe had loosened, I also planned a self-locking nut on the back. I hope that the screw will not come loose after many hours.

A little acetone on the small bars should reinforce them slightly after drying (see brush).
\nIf you use a countersunk screw on the rear fastening, this does not hit the shaft either. (On the other hand, the stop on the shaft may be more defined than that on the rear cable tie :-)

I have been using the solution for many months without a problem, so I want to make it available to you today. I hope this may also help you.

Update 10.04.2020
\nExtruder_AirFlow_2.1_more_stable_needs_longer_screw.STL
\nneed a longer screw, for example 22-25 mm

Da ich hin und wieder bei gro\u00dffl\u00e4chigen Drucken Warping hatte, habe ich den Drucker so optimiert das die Luft durch das Hotend nicht auf das Druckbett bl\u00e4st.
\nDa ich den Drucker in einem Geh\u00e4use betreibe, konnte ich Luftventilation aus anderer Richtung ausschlie\u00dfen.
\nIch konstruierte ein neues Teil, welches links neben den Hotend-L\u00fcfter kommt. Somit geht keine zur\u00fcckkehrende Luft auf das Druckbett.
\nWeiterhin habe ich an der austretenden Seite eine F\u00fchrung f\u00fcr die ausgehende Luft hinzugef\u00fcgt. Diese umschlie\u00dft die PINDA-Sonde ein wenig.
\nWeil ich gerade dabei war, und es schon vorkam das sich die Schraube der PINDA-Sonde gel\u00f6st hat, habe ich am R\u00fcckteil gleich noch eine selbstsichernde Mutter vorgesehen. Ich hoffe so l\u00f6st sich die Schraube nicht wieder nach vielen Stunden.

Ein wenig Aceton an den kleinen Stegen, sollten diese nach Trockung etwas verst\u00e4rken (siehe Pinsel).
\nBenutzt man eine Senkkopfschraube an der hinteren befestigung, so st\u00f6\u00dft dies auch nicht an der Welle an. (Andererseits ist der Anschlag an der Welle eventuell definierter als der am hinteren Kabelbinder :-)

Ich nutze die L\u00f6sung seit vielen Monaten ohne Problem, so will ich sie euch heute zur Verf\u00fcgung stellen. Ich hoffe dies hilft eventuell auch euch weiter.

Print instructions

PETG or ABS, 0,2mm layer, I print 3 perimeters, 50 percent infill
\n(slow down when using ABS)

","category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","description":"Explore upgrades, parts and modifications! Enhance your Prusa 3D printer with spool holders, camera mounts, LCD covers, fan shrouds, and more, including the Lack enclosure \u2013 all designed to optimize your Prusa MK4, XL, MINI, MK3S+, SL1S and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-07-16T19:01:18.047202+00:00","firstPublish":"2020-04-04T17:36:10.995793+00:00","datePublished":"2020-04-04T17:36:10.995793+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"This is partly a remix of the original Prusa parts, and a new part.","likesCount":17,"makesCount":1,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":193,"displayCount":8782,"filesCount":7,"privateCollectionsCount":44,"publicCollectionsCount":37,"pdfFilePath":"media/prints/28409/pdfs/28409-prusa-i3-mk3s-optimized-airflow-and-pinda-securing-53cfebee-8a58-4999-8d34-cc8c95705385.pdf","commentCount":10,"userGcodeCount":0,"remixCount":1,"canBeRated":false,"printer":null,"image":{"id":"135348","filePath":"media/prints/28409/images/282642_1fd42b18-6036-4cb3-a168-cae6d78f5db4/airflow-assembly.jpg","rotation":0,"imageHash":"OAgKB4D3aXeKd4d6hnh5pmd3GFgJgZUA","imageWidth":788,"imageHeight":766,"__typename":"PrintImageType"},"images":[{"id":"135348","filePath":"media/prints/28409/images/282642_1fd42b18-6036-4cb3-a168-cae6d78f5db4/airflow-assembly.jpg","rotation":0,"imageHash":"OAgKB4D3aXeKd4d6hnh5pmd3GFgJgZUA","imageWidth":788,"imageHeight":766,"__typename":"PrintImageType"},{"id":"135349","filePath":"media/prints/28409/images/282643_c5cf0b9e-a7c8-490d-a97d-f64cc0d6c288/20200404_113939.jpg","rotation":0,"imageHash":"mVkKP4xwloh4hneXiYeYeHd2mIA5CpgD","imageWidth":2584,"imageHeight":2571,"__typename":"PrintImageType"},{"id":"135351","filePath":"media/prints/28409/images/282644_3c5b9927-1142-466a-9644-8d77693123ec/20200404_113953.jpg","rotation":0,"imageHash":"E4oOL4pwmIhpmIiHd3dph4eHCOJDED4E","imageWidth":2857,"imageHeight":2778,"__typename":"PrintImageType"},{"id":"135354","filePath":"media/prints/28409/images/282645_e390f9ef-dda4-4734-a951-fe788e9a8666/20200404_173427.jpg","rotation":0,"imageHash":"HzkONwjAh3aZiHh6hmeHaGiIefGnCY8J","imageWidth":2875,"imageHeight":2955,"__typename":"PrintImageType"},{"id":"135358","filePath":"media/prints/28409/images/282646_f9ef443a-9970-40f3-8280-aff01bcf37da/20200404_173355.jpg","rotation":0,"imageHash":"WkkOLwqQeYeVh3ead4d4h3h3GLA2BWoD","imageWidth":2972,"imageHeight":2959,"__typename":"PrintImageType"},{"id":"135357","filePath":"media/prints/28409/images/282652_5bfaa4c0-05f5-4d7b-9a0f-edd09cf3f32e/20200404_173458.jpg","rotation":0,"imageHash":"HEoGP4bIj3MpdJZaZUiamGqpB+NzAGsC","imageWidth":3174,"imageHeight":2995,"__typename":"PrintImageType"},{"id":"135360","filePath":"media/prints/28409/images/282648_64d7c10e-beff-4bed-bbfb-b66555d2e152/20200404_173404.jpg","rotation":0,"imageHash":"4DgOJ4r7d4esaXaJh3eHeIeIuPGWCH0J","imageWidth":2797,"imageHeight":2601,"__typename":"PrintImageType"},{"id":"135355","filePath":"media/prints/28409/images/282647_9d837b46-e7e2-4ffd-9b4e-92af62376c47/20200404_173440.jpg","rotation":0,"imageHash":"2YkKLpCvmZh0iIh9eYeZeHl4Co+F8Fc=","imageWidth":3445,"imageHeight":3011,"__typename":"PrintImageType"},{"id":"135367","filePath":"media/prints/28409/images/282654_eee5ea01-2eab-46cb-8fae-19dc9b079532/20200404_173650.jpg","rotation":0,"imageHash":"HggKB4CAiHeImXiPdrd5h4t3afZEZV8D","imageWidth":2854,"imageHeight":2687,"__typename":"PrintImageType"},{"id":"135352","filePath":"media/prints/28409/images/282650_539ddcda-b072-4ece-947b-80390df40ad6/20200404_173829.jpg","rotation":0,"imageHash":"FggGD4LJNphwW3aadYhohYeFpwh+l9AI","imageWidth":2399,"imageHeight":2360,"__typename":"PrintImageType"},{"id":"135365","filePath":"media/prints/28409/images/282658_c2b55615-1cfd-483e-a1fa-909fccc43105/20200404_180801.jpg","rotation":0,"imageHash":"ZPgRD4BfxHZseHh7h4Z3iIaJ92bHpuEP","imageWidth":2777,"imageHeight":2697,"__typename":"PrintImageType"},{"id":"135350","filePath":"media/prints/28409/images/282649_ccf00d5e-e88c-4052-9f06-e138cf782ecf/20200404_180959.jpg","rotation":0,"imageHash":"ZwgSDwD2e2d8hXeaZoh4l2eHdo+3mHUP","imageWidth":2744,"imageHeight":2813,"__typename":"PrintImageType"},{"id":"135353","filePath":"media/prints/28409/images/282651_fa8a76da-b5d3-4f30-a9c1-ee79b7aa7d6c/20200404_180320.jpg","rotation":0,"imageHash":"FwgKFoJoeJl1eYhraAh5d4aIT4f687k=","imageWidth":2889,"imageHeight":2480,"__typename":"PrintImageType"},{"id":"135356","filePath":"media/prints/28409/images/282653_bb1cb18e-ba7c-4f20-ad98-3ac8cb915d46/20200404_181443.jpg","rotation":0,"imageHash":"0UgKXxCYZWa/d3mKd3l3mHiI98WZb50I","imageWidth":2106,"imageHeight":2126,"__typename":"PrintImageType"},{"id":"135362","filePath":"media/prints/28409/images/282660_a9582259-b8de-4170-94ab-8e61cef4d11d/20200404_181621.jpg","rotation":0,"imageHash":"jzgKPwqLWaWrd4ljqQiVaId59+d3f48G","imageWidth":1634,"imageHeight":1766,"__typename":"PrintImageType"},{"id":"135359","filePath":"media/prints/28409/images/282659_4be92384-556c-4e1d-aec5-f382c9df2c94/20200404_181520.jpg","rotation":0,"imageHash":"WUkKLwjQa6XgVotXlliFeHl5+LhXf3wE","imageWidth":1567,"imageHeight":1650,"__typename":"PrintImageType"},{"id":"135366","filePath":"media/prints/28409/images/282657_818f7fe9-b7c8-4e10-bbd4-69ebd0a052b8/20200404_180341.jpg","rotation":0,"imageHash":"3QcKHoZQtnZ8aGdqhXd6SamUCNS2IG0=","imageWidth":2254,"imageHeight":2059,"__typename":"PrintImageType"},{"id":"135361","filePath":"media/prints/28409/images/282656_de1a8639-e8c5-46c5-9174-96e2c16e05d9/20200404_181855.jpg","rotation":0,"imageHash":"VcYFVwzmmqZML7drWcd4e5daB2eWYGYI","imageWidth":2919,"imageHeight":2919,"__typename":"PrintImageType"},{"id":"135364","filePath":"media/prints/28409/images/282661_d8751384-132b-401e-a5ac-b5b6e6e5f79e/20200404_181902.jpg","rotation":0,"imageHash":"FucJP4aHg3kAfoeomJhahpWZB0WmUHYL","imageWidth":3015,"imageHeight":2982,"__typename":"PrintImageType"},{"id":"135363","filePath":"media/prints/28409/images/282655_5caa65c3-1d93-48a1-b2fb-9de410d146ac/20200404_181829.jpg","rotation":0,"imageHash":"GQgKFoJvZ4qtaId1iHi3iYeYtoBUH1c=","imageWidth":3323,"imageHeight":3021,"__typename":"PrintImageType"}],"tags":[{"name":"prusai3mk3s","id":"4081","__typename":"TagType"},{"name":"airflow","id":"5452","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"114168","filePreviewPath":"media/prints/28409/stls/282639_6c9073db-ab08-4531-9736-3e9924f16d9a/extruder_airflow_2_preview.png","__typename":"STLType"},"license":{"id":"1","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"52196","name":"shaun the sheep V2 - new face - toilet roll - easy print","slug":"shaun-the-sheep-v2-new-face-toilet-roll-easy-print","ratingAvg":"4.7500000000","likesCount":290,"liked":null,"datePublished":"2021-01-16T13:45:51.207901+00:00","dateFeatured":null,"firstPublish":"2021-01-16T13:45:51.207901+00:00","downloadCount":997,"mmu":false,"category":{"id":"5","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"5","name":"Bathroom","nameEn":"Bathroom","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-07-07T19:22:36.592317+00:00","image":{"id":"245556","filePath":"media/prints/52196/images/515505_f7fea72a-3ced-401b-b9ce-6086e7e0bfd0/large_display_20210116_114502_52196.jpg","rotation":0,"imageHash":"oigKJwSKaZdvh4hyZ0iId4aJRtr4xokP","imageWidth":966,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"62043","name":"RGB DOUBLE HELIX LAMP - easyprint","slug":"rgb-double-helix-lamp-easyprint","ratingAvg":"5.0000000000","likesCount":181,"liked":null,"datePublished":"2022-11-12T18:31:59.816228+00:00","dateFeatured":null,"firstPublish":"2021-03-31T17:33:09.729729+00:00","downloadCount":476,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-11-12T18:31:59.836861+00:00","image":{"id":"325785","filePath":"media/prints/62043/images/649709_f681ad47-4bc2-4043-b2f6-cbade41d885f/large_display_double_helix_lamp_title_small_62043.jpg","rotation":0,"imageHash":"GPgFHwTppzZ/d3eFiJl4Z6eIePWXmH0P","imageWidth":811,"imageHeight":822,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"55002","name":"cross tweezers Pinzette - easy print","slug":"cross-tweezers-pinzette-easy-print","ratingAvg":"4.9285714286","likesCount":157,"liked":null,"datePublished":"2023-11-17T21:03:58.605672+00:00","dateFeatured":null,"firstPublish":"2021-02-02T17:00:28.769151+00:00","downloadCount":1058,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-11-17T21:03:58.636306+00:00","image":{"id":"259030","filePath":"media/prints/55002/images/545644_2ddd9275-ecbe-452b-a536-cfb34215e64d/large_display_20210202_173301_55002.jpg","rotation":0,"imageHash":"7AcKD4BgiIidd3d3hXiHiZh2CIio8qUM","imageWidth":1024,"imageHeight":954,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"50932","name":"Pferde Unterstand - Horse shelter (Schleich Horse Club) - easyprint","slug":"pferde-unterstand-horse-shelter-schleich-horse-clu","ratingAvg":"4.9230769231","likesCount":139,"liked":null,"datePublished":"2021-01-04T22:04:56.014157+00:00","dateFeatured":null,"firstPublish":"2021-01-04T22:04:56.014157+00:00","downloadCount":743,"mmu":false,"category":{"id":"47","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"47","name":"Other Toys & Games","nameEn":"Other Toys & Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-04-12T14:17:14.880358+00:00","image":{"id":"239912","filePath":"media/prints/50932/images/503071_5b8509ca-538e-4256-b231-c85097463141/large_display_20210103_125049_50932.jpg","rotation":0,"imageHash":"InoGFwSfdnZ5aIZ6dnd3p4d6mPfHJX8H","imageWidth":1015,"imageHeight":1024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"221342","name":"amazon echo dot 4 (may be 5) socket mount","slug":"amazon-echo-dot-4-may-be-5-socket-mount","ratingAvg":"4.9375000000","likesCount":99,"liked":null,"datePublished":"2024-05-02T19:29:57.591019+00:00","dateFeatured":null,"firstPublish":"2022-06-06T17:51:45.114657+00:00","downloadCount":731,"mmu":false,"category":{"id":"52","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"52","name":"Electronics","nameEn":"Electronics","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-05-02T19:29:58.081221+00:00","image":{"id":"994844","filePath":"media/prints/221342/images/2022674_c647378b-1a80-4073-bc1e-fdea7d4a0474/large_display_20220606_154227_221342.jpg","rotation":0,"imageHash":"XicOPwJvh4d7h4d1iJhoeIeHBxiF+oEF","imageWidth":904,"imageHeight":963,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"598597","name":"PRUSA MMU3-Buffer filament threading support, Loading aid","slug":"prusa-mmu3-buffer-filament-threading-support-loadi","ratingAvg":"4.9523809524","likesCount":97,"liked":null,"datePublished":"2024-11-22T20:14:06.241185+00:00","dateFeatured":null,"firstPublish":"2023-09-30T12:57:30.391134+00:00","downloadCount":362,"mmu":false,"category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-11-22T20:14:06.275053+00:00","image":{"id":"2257311","filePath":"media/prints/598597/images/4764969_6ca7e770-8374-4316-a82b-4195d594a774_e88515b2-abba-40e0-aa96-d0ce1d178a14/20230930_133604.jpg","rotation":0,"imageHash":"2qcJFYz4WWRdZXh3ZneXZm8R/QiV","imageWidth":4000,"imageHeight":3000,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"50036","name":"Pferde Gatter, Zaun, Hindernis - gate, fence, obstacle suitable for Schleich horses","slug":"pferde-gatter-zaun-hindernis-gate-fence-obstacle-s","ratingAvg":"5.0000000000","likesCount":97,"liked":null,"datePublished":"2023-09-17T11:00:23.855650+00:00","dateFeatured":null,"firstPublish":"2020-12-27T16:59:39.147550+00:00","downloadCount":662,"mmu":false,"category":{"id":"47","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"47","name":"Other Toys & Games","nameEn":"Other Toys & Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-09-17T11:00:23.873112+00:00","image":{"id":"236485","filePath":"media/prints/50036/images/495665_91e4c796-0d78-4c70-a3d4-b1866a081177/large_display_20201225_204809_50036.jpg","rotation":0,"imageHash":"IkoGDoJwvJWliWZvaIdmxWx4ja/86Gc=","imageWidth":1024,"imageHeight":946,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"40654","name":"Shaun the sheep - new legs","slug":"shaun-the-sheep-new-legs","ratingAvg":"4.6666666667","likesCount":96,"liked":null,"datePublished":"2022-12-02T21:11:23.117133+00:00","dateFeatured":null,"firstPublish":"2020-09-12T19:23:50.437727+00:00","downloadCount":403,"mmu":false,"category":{"id":"43","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"43","name":"Other Gadgets","nameEn":"Other Gadgets","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2022-12-02T21:11:23.144860+00:00","image":{"id":"192930","filePath":"media/prints/40654/images/402586_45131703-0503-412b-a284-eaee15049c0d/large_display_20200802_125102_40654.jpg","rotation":0,"imageHash":"6RgKDYJqeneHh3h/aGeHddB6Aph3","imageWidth":1024,"imageHeight":768,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"9013","handle":"Hedo3D","verified":false,"dateVerified":null,"publicUsername":"Hedo3D","avatarFilePath":"media/auth/avatars/ab/ab78884b-ef4b-40c7-ad3d-c955431904ba.jpg","badgesProfileLevel":{"profileLevel":21,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}