Basic remix of the very good design from Oscarko on thingiverse: https://www.thingiverse.com/thing:3099552
What I did:
With the new shape it is easy to concatenate multiple holders side by side. Here attached the STL files for 1, 2 and 3 pens.
With the magnets I had available (10mm diameter, 5mm thickness) the hole is fitting perfectly. I had to push the magnets in place with some force but no need to glue them.
To increase the friction between the magnet and the support you can tape some granular masking tape on the backside of the part.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Geeetech silk PLA silk blue
Notes:
Category: Household
The author marked this model as their own original creation. Imported from Thingiverse.