Improved mount for the Z axis motors on my CTC I3 printer. You can use a M8 rod to connect these mounts with the M10 Y-Axis rods. The Motormount STL file is for both left and right motors.
Use M10 Nuts and big washers to get a really strong connection.
Printer:
CTC I3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Notes:
I did not used a brim
Place the side with the "Z" downNuts
Add the M3 nuts with the help of a soldering iron. The hex shaped space for the nuts are too small for normal placement of the nuts. This method ensures that the nuts have a strong connection and they don't fall out when assembling it.
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.