Raspberry pi zero camera octoprint

Design to uso double side tape to glue into your printer frame , the camera have 180 degress of rotation to allow you to set the better view for your set up.

Dont need any support ,desing with cable managment in mind featuring two cable ties guides built in.

To assemble it you will only need a few things:

M3 Set screw https://s.click.aliexpress.com/e/_DktyA3H

3M double side tape https://s.click.aliexpress.com/e/_DC0rsm7

Cable tie https://s.click.aliexpress.com/e/_Dk05TRh

Raspberry camera https://s.click.aliexpress.com/e/_DFXB3CT

Raspberry pi zero 2 https://s.click.aliexpress.com/e/_DEB3hlH

To assembly you will need.

4u. M3x20mm screws to screw to cover in place.

2u M3x16mm screw to secure the camera mount.