Pegboard Accesoires and Organizers

I made shelfs, tape measure holder, USB adapter holder, cable holder, pen holder, screwdriver holder and some hooks! 

They're all very easy to print and strong at the same time! 

For the shelf itself you can choose a material, I chose 1,5 mm multiplex wood but you can also use a sheet of cardboard, aluminium or something else..

And you can choose to fasten the sheet of material onto the shelf holder with M3 bolts and nuts. You don't really need these because if you place something heavy on it, it stays there without falling.

If you want to print the magnetic screwdriver holder, you need to use magnets of Ø4mm x 3mm and maybe some hot glue to keep them in place.

For the USB adapter holder and the pen holder I used every time 4x M3x12mm bolts and 4x M3 Short threaded inserts.

Printsettings:

• 0,15mm Layer heights
• 20% Infill
• 55mm/s 
• Only for the tape measure holder I used supports
• No brim or raft

(I don't know why but the layout changed when I saved the description..)